|
| Brand Name: | OYI |
| Model Number: | MEA218 |
| MOQ: | 5 |
| Price: | USD1500 |
| Delivery Time: | 5-18DAYS |
| Payment Terms: | L/C,D/A,D/P,T/T,Western Union |
OYIFLOC anionic polyelectrolyte flocculant is specifically designed for aluminium production red sludge washing and sedimentation processes.
| Trade Name | OYIFLOC FLOCCULANT |
| Active Ingredient | High molecular weight polymer |
| Chemical Name | Anionic Polyelectrolyte Flocculant |
| CAS No. | 9003-05-8 |
| Standard | GB17514-2008 |
| Brand | OYIFLOC |
| Certification | ISO, SGS |
| MOQ | 500kgs |
| Port of Loading | Shanghai Port, China |
| Delivery Time | Within 10 Working Days After Payment |
| Package | 25kgs kraft bag or white PE bag on pallet (18-20ton/FCL) or 750kgs big bag |
| Sample | Free to test |
| Appearance | Milky white emulsion |
| Ionic Charge | Anionic |
| Molecular Weight | Very high (18-25 million) |
| Hydrolysis Degree | 70-100% |
| Approximate Brookfield Viscosity at 25°C | 100-2000cps |
| Bulk Density | About 0.6-0.8 |
| Solid Content | 38% min |
| Active Content | 100% |
| Specific Gravity at 25°C | 1.01-1.1 |
| Recommended Working Concentration | 0.1% |
The dosage range varies from 0.2 - 3.0 ppm depending on effluent type and application. Always conduct jar testing to evaluate performance and determine optimal dosage.
Place effluent sample in a beaker, add designated flocculant, agitate for 1 minute at 100-120 rpm, then slowly agitate at 60 rpm. Observe floc formation and note sedimentation rate and top solution clarity.
Dissolving Time: Most flocculants require approximately 1 hour of agitation for complete dissolution. Incomplete mixing or lumping may inhibit performance.
Agitation Speed: Ideal revolution is 200-400 rpm. High-speed agitation without motor revolution reduction may damage flocculant molecules.
Dissolving Concentration: Standard concentration is 0.1-0.2%. Starting at slightly higher concentration then diluting before use is also effective.
Wear appropriate personal protective equipment including splash goggles, lab coat, vapor respirator, gloves, and boots. Wash skin splashes immediately with water. For eye exposure, flush with fresh water and seek medical attention. Do not ingest. Refer to MSDS for complete safety details.
