Products

Home / Products / Water Treatment Chemicals /

HAA7525 High Hydrolysis Anionic PAM Flocculant for Tailings Management and Mineral Processing

HAA7525 High Hydrolysis Anionic PAM Flocculant for Tailings Management and Mineral Processing

Brand Name:	OYI POLYMER
Model Number:	APAM/NPAM/CPAM
MOQ:	1 MT
Price:	USD1500-2500
Payment Terms:	L/C,D/A,D/P,T/T,Western Union
Supply Ability:	100000MT/YEARS

Detail Information

Product Description

Detail Information

Place of Origin:

JIANGSU,CHINA

Certification:

ISO SGS

Cas No.:

9003-05-8, 25085-02-3, C3H5ON

Appearance:

White Powder

Product Name:

Cationic Polyacrylamide Waste Water Treatment Chemical Flocculant

Application:

Waste Water Treatment,Water Treatment Chimicals,Sewage Water Treatment,Coal Mine Washing,paper Sludge Dewatering

Molecular Weight:

8-15 Million

Keywords:

Polyacrylamide Flocculant For Wastewater Treatment

Package:

Net 25KG Or Net 750KG Per Paper Bag Or PE Bag Packing

Packaging Details:

25KG/750KG;25KG/200L/1050KG

Product Description

HAA7525 High Hydrolysis Anionic PAM Flocculant for Tailings Management and Mineral Processing

Polyacrylamide is a general term for acrylamide homopolymer orpolymers obtained by copolymerization withother monomers. It is one of the most widelyused varieties of water-soluble polymers. It is ahard glassy solid at room temperature, andbecomes a transparent liquid after dissolutionAfter long-term storage of the liquid, the viscosityof the solution will decrease due to the slowdegradation of the polymer. The main applicationareas are water treatment, papermaking, miningmetallurgy, etc.

OYIFLOC Cationic Polyacrylamide Specifications

Appearance	White Powder
Mass fraction of polymer content	≥89%
Charge degree:	40-80%
Molecular weight	18-25 million
Mass fraction of acrylamide monomer	≤0.25%
Dissolving time (1g/L)	≤60min

Main Applications

Tailings Thickening

* Faster settling rates

* Higher underflow solids concentration

* Reduced thickener footprint

Clarification & Water Recovery

* Clear overflow water suitable for reuse

* Reduced freshwater intake

* Improved process water recycling

Sludge Dewatering

* Enhanced performance in thickeners and settling ponds

* Reduced sludge volume

* Lower disposal and handling costs

Mining & Metallurgy Processes

* Copper, gold, iron ore, coal, bauxite, phosphate, lithium, and other mineral tailings

* Compatible with most thickener and clarifier designs

Product Advantages

Economical and achieve good effects at low dosage.
Significantly improve the sludge production efficiency and reduce the moisture content of sludge cake
lncrease the settling rate of suspended solids during the solid-liquid separation in sewage treatment process.
Highly effective in a wide PH range(2-9), it is capable of treating waste water and sludge under weak acidic condition.

Product Forms

Anionic Polymer Flocculant Powder	Anionic Polymer Flocculant Emulsion
High purity Cost-effective transportation Long shelf life Suitable for manual or automatic dosing systems	Fast dissolution Easy handling Ideal for continuous dosing systems High efficiency at low dosage

Usage Instructions

Preparation:
Dissolve CPAM in clean water to make a 0.1%–0.3% aqueous solution. Stir slowly to avoid clumping.
Application:
Add the prepared solution evenly into the wastewater system.
Dosage:
Typical dosage is 1–10 ppm, depending on wastewater characteristics.
Mixing:
Allow proper mixing and reaction time for optimal floc formation.

How to use OYIFLOC Anionic Polymer Flocculant?

Prepare stock solution if using powder: dissolve 0.1-0.2 g/L in water (adjust per lab test). Stir for 30–60 minutes until fully hydrated.
Liquid product: dilute to recommended working concentration per technical sheet.
Typical dosage range: 0.1–10 mg/L (vary by application and water quality). Perform jar test to determine optimal dose.
Add flocculant after coagulation stage or directly to influent stream; mix gently then allow settling. Adjust pH and dose based on jar test results.

Tags:

Water Treatment Chemicals

Decoloring Agent Water Treatment

Anionic Polyacrylamide

Cationic Polyacrylamide

Nonionic Polyacrylamide

Polyaluminium Chloride

Antifoaming Agent

Polymer Coagulant

Polymer Flocculant

Alumina Flocculant

Drilling Polymer

Mining Flocculants