Ürünler
Evde / Ürünler / renk giderici ajan su arıtma /

Wastewater Color Remover Chemical Water Decoloring Agent Bwd-01 Decolorant Ion Exchange Based Polymer Decolouring Agent

Wastewater Color Remover Chemical Water Decoloring Agent Bwd-01 Decolorant Ion Exchange Based Polymer Decolouring Agent

Marka Adı: OYI
Model Numarası: DCA-58
Adedi: 5 ton
Fiyat: USD650
Ödeme Şartları: T/T,L/C,Western Union
Tedarik Yeteneği: 5000T/M
Ayrıntılı Bilgiler
Menşe yeri:
Çin
katı içerik:
%50
Dış görünüş:
Renksiz Sıvı
Uygulamalar:
Su arıtma, kağıt yapımı, madencilik, sondaj, renk giderici madde, tekstil boyama su renginin gideril
Ambalaj bilgileri:
25KG, 30KG, 1250KG VARİLLER
Vurgulamak:

wastewater color remover chemical

,

water decoloring agent polymer

,

ion exchange decolorant Bwd-01

Ürün Tanımı
Wastewater Color Remover Chemical Water Decoloring Agent Bwd-01 Decolorant Ion Exchange Based Polymer Decolouring Agent
General Instruction

Chemical Type: Quaternary Ammonium Cationic Polymer

Form: Colorless to yellowish transparent liquid

Primary Functions: Color removal, COD reduction, and flocculation


Highlights:

DCA-58 is Our Wastewater Color Remover Of BWD-01 is highly efficient decoloring flocculant applied in the treatment of effluent from dyestuff printing and dyeing, paper mills.

Key Performance Features
  • DCA-58 Water Decoloring Agent is a new type of high efficient decolorizing flocculant, It is a color removal chemical, special product for de-coloring, flocculating, CODcr decreasing and other applications used to remove the color of wastewater generated by textiles process houses and dyes industries and other fields.
  • It has high color removal of dye wastewater, by providing a large number of cations, the negative charge is brought on dye molecules are neutralized instability, at the same time with DCA-58 Water Decoloring Agent by a large number of hydrolysis of flocs. Can be adsorbed dye, destabilization of the snare, from water separation, so as to achieve the purpose of bleaching.
  • It is medium molecular weight polymeric coagulant and highly efficient decoloring flocculant.
  • The colored effluents, generated by the industries, when left untreated, play havoc with reusable water resources. For process houses, in water-scarce areas, it comes as heaven-sent facilitating recycling of the industrial effluent into process water. DCA-58 Water Decoloring Agent is used to solve this problem.
    DCA-58 Water Decoloring Agent is specially working high performance with the dyeing wastewater containing the hydrophilic dyes (reactive dyes, acid dyes, disperse dyes, etc.), less dosage, the color clear, fast speed, high processing liquid clarification of the settlement, but also reduce the composition of COD, improve the COD removal rate.
  • It can be used before or after the biochemical treatment, suggested to dose after the biochemical treatment, can be with low consumption, and low effect on the bacteria.
  • In papermaking, DCA-58 Water Decoloring Agent also can be used as a fixing agent in the paper processing, will be a very good performance.
Technical Specifications
Parameter Value
Appearance Colorless to yellowish liquid
Solid Content ≥ 50%
Specific Gravity 1.20-1.25 @ 20°C
pH (30% Solution) 3 - 6
Viscosity (25°C) 30-250 cps
Solubility Fully soluble in water
Ion Type Cationic polyelectrolyte
Application Guidelines
  • Dilutes with 10 - 40 times water and then dosed into the waste water Directly, after being mixed for several minutes, waste is precipitated orAir-floated and the water become clear
  • pH index of the waste water should be adjusted to 7 - 10 for better Result
  • If colority and COD are relatively high, it can be used with the help ofPolyaluminum chloride to reduce treatment cost, whether polyaluminum Chloride is used before or afterwards depends on the flocculation test And the treatment process
CASES FROM FACTORY
The dyehouses are divided in 2 categories:
 
A. When they have biological treatment first and after they make chemical treatment. In this case they use:
DCA-58 70-80 ppm
Polyaluminum Chloride 25-70 ppm 
Anionic polyacrylamide 1-2 ppm

First we apply the PAC (contact time 3-5 min with the waste water), after then DCA-58 Water Decoloring Agent (contact time 5-10 min), and after then anionic polyacrylamide.

It will give too much economy if we'll adjust the pH 7-8, otherwise the consumption of DCA-58 will be ~20% higher.
 

B. When the treat first by chemicals, then the usual dosages are:
Adjustment the pH 7-8
DCA-58 80-100 ppm 
Polyaluminum Chloride 80-150 ppm 
Anionic polyacrylamide 1-5 ppm 
 

Partner with OYIPOLYMER

We maintain long-term cooperation with Indian WWTP EPC contractors and provide comprehensive support to trading companies and importers for PAN-India supply chain management.

Value-Added Services:

  • Free laboratory testing for your specific wastewater samples
  • Complete coagulant and flocculant solutions: PAC + PAM + DCA-58
  • Factory-direct competitive pricing with stable delivery schedules
Wastewater Color Remover Chemical Water Decoloring Agent Bwd-01 Decolorant Ion Exchange Based Polymer Decolouring Agent 0