producten

Huis / Producten / chemicaliën voor waterbehandeling /

Pdadmac Decoloring Agent 26062-79-3

Merknaam:	OYI
Modelnummer:	DA461
MOQ:	5 ton
Prijs:	USD1050
Betalingsvoorwaarden:	T/T,L/C,Western Union
Toeleveringsvermogen:	2000t/m

Detailinformatie

Productomschrijving

Detailinformatie

Plaats van herkomst:

China

Solide inhoud:

40%

verschijning:

Kleurloze tot lichtgele vloeistof

Toepassingen:

Waterbehandeling, papierproductie, mijnbouw, boren, ontkleuringsmiddel, textielverven, aquarelverwij

Verpakking Details:

25KG, 205KG, 1100KG TROMMELS

Markeren:

Pdadmac water treatment decoloring agent

Pdadmac 26062-79-3 chemical

Water treatment chemical with pdadmac

Productomschrijving

Pdadmac Decoloring Agent 26062-79-3

Polydadmac,technically named Poly dimethyl diallyl ammonium chloride, is cationic polymer in powder or liquid form and it can be completely dissolved in water.

Pdadmac Applications

PDADMAC can be widely used in industrial waste water and surface water purification as well as sludge thickening and dewatering.
It can improve water clarity at a relatively low dose. It has good activity that accelerate the sedimentation rate.
It is suitable for a wide range of PH 4-10.
This product can also be used in the colliery waste water, paper making waste water, oil field and oil refinery oily waste water and urban sewage treatment.

Pdadmac Decoloring Agent 26062-79-3 0

Product Grades and Technical Data

Appearance	Colorless or Light-Clolor Sticky Liquid	White or Light Yellow Powder
Dynamic Viscosity(mpa.s,20ºC)	500-300000	5-500
pH value(1% water solution)	3.0-8.0	5.0-7.0
Solid Content % ≥	20-50%	≥88%
Shelf Life	One year	One year
Note: Our product can be made upon your special request.	liquid	Consistent quality

Application Method

Liquid
1. When used alone, it should be diluted to the concentration of 0.5%-0.05%(based on solid content).
2. In dealing with different source water or waste water, the dosage is based on the turbidity and the concentration of the water. The most economical dosage is based on the jar test.
3. The dosing spot and the mixing velocity should be carefully decided to guarantee that the chemical can be mixed evenly with the other chemicals in the water and the flocs can not be broken.
4. It is better to dose the product continuously.
Powder
The product need to be prepared in factories equipped with dosing and distribution device. Sustained moderate stirring is required. Water temperature should be controlled between 10-40ºC. The required amount of this product depends on the quality of water or characteristics of sludge ,or judged by experiment.

Packaging and Storage

Liquid grades

25 L plastic drums
200 L plastic drums
1000 L IBC containers

Powder grades

20 kg kraft paper bags with inner PE liner

Store in original containers in a cool dry place away from heat and direct sunlight. Follow label TDS and MSDS for handling and shelf life.

Markeringen:

chemicaliën voor waterbehandeling

ontkleuringsmiddel waterbehandeling

anionisch polyacrylamide

cationische polyacrylamide

niet-ionisch polyacrylamide

Polyaluminiumchloride

Antifoaming Agent

Polymer coagulant

flocculant van polymeren

uitvlokmiddel van aluminiumoxide

Polymer voor het boren

Flocculanten voor mijnbouw